Well-designed and constructed fences are essential infrastructure on any property, especially for livestock farmers. If your fences are in need of repair and restructuring, it is important to take action as soon as possible. The following is a quick guide on what you need to do in case this is something coming up on your agenda:
1. Prepare the Materials
The first step is to decide on the most appropriate fence for the job. For example, a conventional ring lock fence from DTSWA.com.au serves as a physical barrier while the electric variety relies on electric shock to prevent livestock from crossing the fence.
2. Plant the Post
If you are not resizing your parameter, you can uproot wooden posts by digging on the sides to loosen the soil surrounding it. If you are using a treated wood post with similar size and thickness, maintain the diameter of the hole.
The fattest end of the pole goes in the ground, with at least one meter of the post buried underground. The remaining length determines how deep your fence post installation needs to be.
3. Level the Post
For a well-erected post installation, use a spirit or automatic level to ensure the post is vertical. This is best done if you are already using a little soil to fill the space surrounding the post to keep it steady.
The gap around your posts must be restocked so they would not lean after the fence field is put up. To do this, throw in some small rocks between each layer of soil and tamp the rocks hard with a star picket or pipe. Larger rocks are tamped in near the top of the hole where they will best resist the stress imparted by fences pulled against the post.
4. Attach the Wire
Attaching the wire requires great strength and reliable equipment. Tie the prefabricated fence to one post and roll to the next. Strain it with a multi-wire strainer to ensure equal tension. Use gripples to lock and join the fence rolls. Take the multiwire strainers and tie the ends. Tie the knots with pliers taking care that the excess wires are tucked in properly to avoid getting your animals torn. It should also be tight enough to hold tension.
Replacing old and worn out wired fences is easier if you have practical knowledge. Planning the right materials and tools helps make the job neater and longer lasting.